Existing device · Planned move · Manual review
Use this time clock relocation checklist to move an existing shared clock or tablet kiosk and document whether it works correctly at its destination. A successful connection is only the first check: the right people must be able to punch, and the saved record must carry the intended location and labor codes.
Bring: the device inventory record, approved destination setup, access criteria, current configuration, an authorized test method and a reviewer. Leave with: a before/after record and an evidenced release or hold decision.
Start the relocation reviewCheck a box only after recording the evidence in your own change record. Boxes are temporary reading aids; they do not save data, configure your clock or calculate approval.
Focus the box, select all and copy. Paste into your approved spreadsheet or document; fill it there. This page does not retain your checklist or create a download.
Worked example · Fictional device and codes
A shared tablet, asset K-04, moves from the receiving desk to the packing entrance in the same time zone. The approved plan keeps the same station identity and employee group but changes the default branch from REC to PACK.
REC and PACK are illustrative labels, not real TimeTrex defaults. A single demonstration does not replace testing the relevant methods and eligibility paths in your own plan.
In TimeTrex, Station ID and Source are separate fields. Default Branch and Default Department determine punch defaults; Employee Criteria controls who is eligible to use the station. Verify each against the destination plan rather than treating a branch default as an access restriction. See the official Stations reference.
The same reference says wildcard settings do not override existing specific station records. For kiosk/mobile stations, inspect the specific record actually in use. Its Mobile App tab also describes reference-data download frequency and warns against disabling time synchronization unless requested by TimeTrex support. Do not weaken those controls to force a relocation test to pass.
Kiosk punch methods and settings depend on the configured device and edition. Use the official kiosk guide alongside your model instructions. This worksheet is an operational record, not a step-by-step settings recipe.
Hold the affected use. Compare the actual specific station, employee criteria and punch defaults with the approved destination plan. Preserve the failed evidence, assign an administrator, and repeat the affected positive and restriction checks after the authorized correction.
Keep the result unresolved. Trace the authorized test in the saved records before retrying repeatedly. Record device/server context and time zone; ask the timekeeping owner or support to investigate. Reconcile test and fallback records using the approved process without deleting genuine time.
A replacement device needs its own identity/enrollment review; do not assume the old station identity carries over. A different employee population needs new eligibility tests. A cross-zone move needs explicit date/time-zone validation in both device display and saved records. If scope is unclear, pause release and obtain a revised plan.
This is a qualitative checklist, not a calculator. Inputs are one device’s approved change plan, before/after observations and test evidence. The output is a manually signed release/hold record. There are no rates, numerical thresholds, rounding rules or implied pass percentages. A blank field is unknown until investigated; it is never zero or proof of completion.
Use the same device and destination scope throughout the record. For an unused destination, record “no in-scope use” and obtain scope review instead of inventing a test result. Model, network, edition, access policy and payroll procedures can change the tests required. The documentation links were checked November 6, 2026; the staged review and example are TimeTrex editorial operating suggestions, not legal requirements.
For a separate review of clock-time offsets, use the Time Clock Drift Audit Worksheet. Keep physical relocation acceptance and any broader payroll review as distinct records.
Disclaimer: This operational checklist does not configure a device, certify connectivity or security, approve payroll, or establish legal compliance. Follow the current instructions for your clock model, software edition and authorized change process; test records must be handled under your organization’s approved procedures. Verify all inputs, results and assumptions against appropriate records and obtain qualified advice before relying on them. To the fullest extent permitted by applicable law, this resource is provided “as is” without warranties of accuracy, completeness or fitness for a particular purpose, and TimeTrex and its affiliates disclaim liability for losses, damages, costs or claims arising from its use, inability to use, or reliance on it, including errors or omissions. Nothing in this disclaimer excludes or limits liability or rights that cannot lawfully be excluded or limited.
Trusted By
Join our ever-growing community of satisfied customers today and experience the unparalleled benefits of TimeTrex.
Strength In Numbers
Time To Clock-In
Experience the Ultimate Workforce Solution and Revolutionize Your Business Today
Saving businesses time and money through better workforce management since 2003.
Copyright © 2026 TimeTrex. All Rights Reserved.