Timesheet Approval Rate Calculator

Free TimeTrex resource

Timesheet Approval Rate Calculator

Measure on-time approvals, separate late and outstanding timesheets, and compare periods using a clear counting rule.

Count due timesheets

Count one employee-period timesheet once. Use a closed deadline and one snapshot for each period.

Current period

Comparison period

Approval timeliness summary

Current on-time approval rateOn-time approvals divided by all due timesheets
Approved by snapshot
Approved late
Outstanding at snapshot
Comparison on-time rate
Change in on-time rate
On-time approvals needed for target
Additional on-time approvals needed
Target assessment

Build a reliable approval snapshot

  1. Define the unit and scope. Count one employee-period timesheet, rather than hours, daily entries, approval clicks or employees regardless of period. A person with two due periods contributes two sheets. Set the team, period dates, time zone and exclusions before counting. Include sheets that are required but not yet submitted so missing records do not inflate the rate.
  2. Set the deadline and observation time. Write down a specific operational deadline, including time zone, and the later snapshot timestamp. Use records whose deadlines have passed. Approval after that deadline is late even if payroll has not yet run. This tool supplies no legal deadline and does not decide how or when wages must be paid.
  3. Use mutually exclusive approval groups. Count on-time sheets only if all approvals required by your declared workflow were complete by the deadline and remain complete at the snapshot. Count approved-late sheets only if final approval was obtained after the deadline but by the snapshot. Place unsubmitted, rejected, pending and reopened sheets without current final approval in the outstanding group. Do not count intermediate approver actions as separate sheets.
  4. Reconcile reopened and corrected records. Keep an audit trail for changes. For a reopened sheet, use the latest completed approval cycle that is valid at the snapshot; classify it by that cycle's completion time. If its final reapproval occurs after the deadline, classify it as late. This is the worksheet's convention, not a statement about any vendor's default. Never count the same sheet in two categories.
  5. Compare like periods. Apply matching scope, deadline policy and delay between deadline and snapshot. A longer follow-up period can move sheets from outstanding to late-approved without improving on-time results. Enter zero for all three comparison counts if comparison data is unavailable; the comparison rate and change will show N/A.
  6. Review exceptions separately. Use the counts to locate process delays and check delegated approvals, missing submissions and unresolved corrections in the source system. Do not infer the cause or judge an individual from an aggregate rate. An approval count cannot establish accurate pay, complete time records or payroll readiness. Do not use this worksheet to withhold or delay pay.

Formulas and worked example

For each period let D be timesheets due, O be approved on time and L be approved late. Outstanding = D − O − L. On-time rate = O ÷ D × 100. Approved-by-snapshot rate = (O + L) ÷ D × 100. Late-approved and outstanding shares use the same D denominator. Change = current on-time rate minus comparison on-time rate, expressed in percentage points.

For a target of T percent, minimum on-time approvals = ceiling(D × T ÷ 100). The count gap = max(0, minimum approvals − O). The target is met only when the unrounded on-time rate meets it. Counts are whole sheets; rates display two decimal places. A rounded rate that looks equal to the target can still fall short.

In the example, 200 sheets are due, 170 are on time and 12 are approved late. The on-time rate is 85.00%; 182 sheets, or 91.00%, are approved by the snapshot. Eighteen remain outstanding, or 9.00%. The comparison period has 162 on-time approvals out of 180 due, or 90.00%, so the change is −5.00 percentage points. A self-selected 95% target requires 190 on-time sheets, a gap of 20. These are illustrative counts, not a benchmark.

Can late approvals close the on-time target gap?

No. Once the deadline has passed, additional approvals improve snapshot completion but cannot become on-time approvals. The displayed target gap describes how many more sheets would have needed approval by the cutoff. It is a process-planning comparison, not a promise that the current historical rate can be repaired. Do not backdate approval timestamps to meet a target.

The count gap may exceed the outstanding count because already-late sheets also missed the deadline. Select your own operational target; the default 95% is an editable example and is not an industry standard, legal requirement or recommended performance threshold.

What if no timesheets are due?

When D is zero, both approval counts must also be zero. The rate and target assessment show N/A, rather than 0% or 100%, because there is no denominator. The required count and gap are zero. If either period has no due sheets, the rate change is N/A. Do not average the two displayed period rates; a combined rate would require pooling compatible numerator and denominator counts.

Approval is different from correctness

A sheet can be approved and still need an hours, coding or pay correction. Approval timeliness is separate from exception rates, missing punches, wage accuracy and schedule adherence. It is also distinct from the employee's submission timeliness: submitted does not necessarily mean fully approved. Define whether automatic approvals are included and use that policy consistently.

Primary workflow examples below show that submission and approval are distinct and that required approvals depend on the system and configuration. This independent calculator does not connect to those products or apply their configuration rules.

Input limits, privacy and exports

Each count accepts whole numbers from 0 to 1,000,000. The sum of on-time and late approvals cannot exceed timesheets due in either period. The target accepts plain numbers from 0 to 100 with up to two decimal places. Blank, negative, exponent-form and comma-separated values are rejected; fractional counts are rejected.

CSV and print are disabled for invalid inputs. Exports include both periods, unrounded rates, outstanding counts, target calculations and counting limitations. Calculations run within this component without application storage or a connection to payroll records. Enter aggregate counts only. Keep dates, time zone, workflow definition and evidence with the export; browser settings can affect downloading and printing.

Primary sources and scope

Workflow examples checked October 29, 2026. The counting convention and arithmetic are independently stated above; no benchmark or vendor-specific deadline is imported.

Disclaimer: This voluntary operations worksheet summarizes aggregate timesheet approval counts using a user-defined deadline and snapshot. It does not validate hours, determine wages, authorize withholding or delaying pay, establish legal deadlines, assess employee performance or certify payroll readiness. Approval workflows, reopened records and data definitions require review; a reported approval is not proof of accuracy or compliance. Verify all inputs, results and assumptions against appropriate records and obtain qualified advice before relying on them. To the fullest extent permitted by applicable law, this resource is provided “as is” without warranties of accuracy, completeness or fitness for a particular purpose, and TimeTrex and its affiliates disclaim liability for losses, damages, costs or claims arising from its use, inability to use, or reliance on it, including errors or omissions. Nothing in this disclaimer excludes or limits liability or rights that cannot lawfully be excluded or limited.

Found our Free Timesheet Approval Rate Calculator useful? Bookmark and share it.

Facebook
X
LinkedIn
Email
WhatsApp
Print
Blue timesheet clipboard with checkmark tiles, a clock and a calculator on white

Trusted By

Trusted by 3.4M+ Employees: 23 Years of Service Across Startups to Fortune 500 Enterprises

Join our ever-growing community of satisfied customers today and experience the unparalleled benefits of TimeTrex.

Logo for H&R Block
Hilton Hotels and Resorts logo
HP computers logo
Oracle logo black and white
PWC brand logo
Texas A&M University logo
Mcdonald's brand logo
New York Stock Exchange Logo black and white
Walmart brand logo
London Drugs logo black and white

Strength In Numbers

Join The Companies Already Benefiting From TimeTrex

Users
0
Companies
0
Years
0

Time To Clock-In

Start your 30-day free trial!

Experience the Ultimate Workforce Solution and Revolutionize Your Business Today

TimeTrex Mobile App Hand