Worksite Travel Buffer Planner

Check if there’s enough time between worksites

Enter the first assignment’s end, the next start, and the time needed to travel and set up. The workbook tells you how many minutes the schedule is short or has to spare, and the earliest feasible start for the second assignment.

Calculate one trip

Download the planner (.xlsx)
  1. Replace the five blue inputs in the workbook. Use full dates and local times in the same time zone.
  2. Enter whole minutes for the route, arrival and setup, and your contingency buffer. Use zero only when a duration is confirmed to be zero.
  3. Review the result. For a shortfall, move the next start to the suggested time, reduce a verified source of delay, or reassign the visit.

Open the file in Excel or another spreadsheet app that recalculates Excel formulas. The workbook starts with the example shown here.

Worked example

A maintenance technician finishes at Site A at 13:40. Site B is scheduled for 14:20. Allow 34 minutes on the road, 6 for parking and access, and 10 for contingency.

Available
40 min
Required
50 min
Shortfall
10 min

Earliest feasible start: 14:30

At 14:30 the schedule still includes the planned 10-minute buffer, with no additional slack.

What the planner counts

Available minutes are the next start minus the first end, rounded to whole minutes. Required minutes add travel, arrival and setup, and contingency. Spare or short minutes subtract required from available. The earliest start adds required time to the first end. This comparison covers one worker moving between two assignments.

Enter dates explicitly for trips past midnight. Convert times to one time zone first and split cases that cross a clock change. Blank inputs remain flagged, and negative or fractional durations and totals above 1,440 minutes are rejected. If the next start comes before the first end, the workbook flags overlapping assignments.

Use a route estimate for the planned departure and confirm access or parking requirements. Once the schedule fits, update the roster in your scheduling system. TimeTrex supports employee access to schedules and rotating schedules on its Scheduling & Leave Management page. For an audit of punches after a move, see How to Reconcile Time Clock Transfers Between Worksites.

Disclaimer: This planner compares scheduled assignments using estimated travel, setup and buffer time. It does not establish actual hours worked, travel pay, or whether a schedule meets applicable requirements. Verify all inputs, results and assumptions against appropriate records and obtain qualified advice before relying on them. To the fullest extent permitted by applicable law, this resource is provided “as is” without warranties of accuracy, completeness or fitness for a particular purpose, and TimeTrex and its affiliates disclaim liability for losses, damages, costs or claims arising from its use, inability to use, or reliance on it, including errors or omissions. Nothing in this disclaimer excludes or limits liability or rights that cannot lawfully be excluded or limited.

Found the Worksite Travel Buffer Planner useful? Bookmark and share it.

Facebook
X
LinkedIn
Email
WhatsApp
Print
Two worksites connected by a route, with a clock at one end and a calendar at the other.

Disclaimer: The content provided on this webpage is for informational purposes only and is not intended to be a substitute for professional advice. While we strive to ensure the accuracy and timeliness of the information presented here, the details may change over time or vary in different jurisdictions. Therefore, we do not guarantee the completeness, reliability, or absolute accuracy of this information. The information on this page should not be used as a basis for making legal, financial, or any other key decisions. We strongly advise consulting with a qualified professional or expert in the relevant field for specific advice, guidance, or services. By using this webpage, you acknowledge that the information is offered “as is” and that we are not liable for any errors, omissions, or inaccuracies in the content, nor for any actions taken based on the information provided. We shall not be held liable for any direct, indirect, incidental, consequential, or punitive damages arising out of your access to, use of, or reliance on any content on this page.

Trusted By

Trusted by 3.4M+ Employees: 23 Years of Service Across Startups to Fortune 500 Enterprises

Join our ever-growing community of satisfied customers today and experience the unparalleled benefits of TimeTrex.

Logo for H&R Block
Hilton Hotels and Resorts logo
HP computers logo
Oracle logo black and white
PWC brand logo
Texas A&M University logo
Mcdonald's brand logo
New York Stock Exchange Logo black and white
Walmart brand logo
London Drugs logo black and white

Strength In Numbers

Join The Companies Already Benefiting From TimeTrex

Users
0
Companies
0
Years
0

Time To Clock-In

Start your 30-day free trial!

Experience the Ultimate Workforce Solution and Revolutionize Your Business Today

TimeTrex Mobile App Hand